Hercules Barrel Handling Solutions

Stationary Drum Rollers

Rotating drums to mix or blend material inside a closed drum saves time, labor and money. Rotate a drum to mix the contents, and ensure homogeneity with fewer hazards. Remix settled or stratified ingredients. Raise and redistribute solids that have settled during shipping and storage.

Key features

 

• Roll standard 55-gallon (210 liter) steel drum to mix contents
• 1-5154 Series Single Drum Rollers roll one drum
• 2-5154 Series Double Drum Rollers roll 1 or 2 drums at a time
• Drum rolls on 4 drive and 4 idler wheels
• Roll Drums with 6" to 28" (15 to 71 cm) diameter, up to 40" (102 cm) tall
• Models available with fixed or variable drum rotating speeds
• Variable speed drum rollers rotate at any speed from 1 to 30 RPM
• Fixed speed drum rollers rotate at 20 RPM
• Load with your hoist or crane with Model 41 Drum Lifting Hook or Model 42 Heavy-Duty Drum Lifter, or with a MORStak Drum Racker
• Maximum ambient operating temperature: 140o F (60o C)
• To roll a 55-gallon (210 liter) plastic drum, factory install Option # POLY-1-5154 on a single drum roller, or Option # POLY-2-5154 on a double drum roller
• To field install, use Kit # POLY-1-5154FI for a single drum roller, or Kit # POLY-2-5154FI for a double drum roller
• To roll 1-to-5 gallon can, install Option # 1-5-1 Idler Attachment for Single Drum Roller, or Option # 1-5-2 Pair of Idler Attachments for Double Drum Roller
• Capacity per Drum:
  • 1000 Lb. (455 kg) with Liquid load in drum
  • 300 Lb. (136 kg) with Dry load in drum
    A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load

Address Safety Issues - Mixing contents inside a sealed drum eliminates the risks of spills and splashing of dangerous contents on workers during transfer, and greatly reduces clean-up, and the risk of contamination. It also eliminates use of special mixing vessels.

Morse 1-5154 Series Single Stationary Drum Rollers roll one 55-gallon (210 liter) steel drum.

Morse 2-5154 Series Double Stationary Drum Rollers allow you to roll 1 or 2 drums at a time.

Models are available with fixed or variable drum rotating speeds. Variable Speed Stationary Drum Rollers rotate your drum at any speed from 1 to 30 RPM. Select the best speed for each material. Enables you to use high speed for initial mixing, then low speed for prolonged agitation. Fixed Speed Stationary Drum Rollers roll a 22.5" diameter drum 20 RPM. The 20 RPM speed is effective for mixing most liquids. Variable speed drum rollers are ideal for experimental use, or where you need to blend a variety of materials.

Combine three components to meet safety requirements:

1. Drum Rotator
2. Control Package (sold separately)
3. Guard Enclosure Kit (sold separately)

OSHA requires a guard enclosure with safety interlock, so that the rotator will automatically stop running if the enclosure gate is opened.

OPTIONS and ACCESSORIES

To roll a 55-gallon (210 liter) plastic drum, factory install Option # POLY-1-5154 on a single drum roller, or Option # POLY-2-5154 on a double drum roller.

Install Option to roll a 1 to 5 gallon size can or pail

• Option # 1-5-1 Idler Attachment for Single Drum Roller
• Option # 1-5-2 Pair of Idler Attachments for Double Drum Roller

NEMA 4/12 Control Box includes Timer, Start and Stop Buttons, Red Emergency Stop Button, Lockable Main Disconnect, and Wire terminals for safety interlock switch. NEMA 7/9 Explosion-Proof Control Box includes Start and Stop Buttons, and wire terminals for external connection of safety interlock switch.

Only NON-Explosion Proof AC Control Packages include a pre-wired control box.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 5 to 6 weeks

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

Additional Information:

• Delivery Time: 2 to 3 months

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

55-Gallon (210 liter) Portable Drum Rollers
Mix contents right inside a sealed drum

Roll a closed drum to mix and blend the contents
Mixing 55-gallon drums is easy with Morse industrial drum mixers

• Compact industrial 55-gallon drum mixers roll a closed drum on its side to agitate the contents.
  
  
• Mixing a sealed drum blends contents while eliminating worker exposure and reducing clean-up.
  
  
• Use separate drum for each batch.
  
  
• Portable 55-gallon drum mixers agitate drum contents without opening the drum!
  
  
• Utilize important ingredients that would otherwise be left in unmixed sediment.
  
  
• Eliminate the clean-up of insertion mixers.
  
  
• Use as a drain stand to dispense into a 5-gallon (20 liter) pail.

Portable drum rollers are available drum with 20 RPM fixed speed, or variable speed to rotate a 55-gallon (210 liter) drum from 15 to 24 RPM

Agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.

Mixing in closed drums eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers. This compact, portable mixer rolls a closed drum to blend the contents. You may also dispense directly from a drum through a faucet.

The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Features of Morse Portable Drum Rollers

• Compact industrial drum roller only 21" wide by 35" long (53 x 89 cm)
• Tipping lever with hook engages drum top rim to load drum onto the drum roller
• Roll various sized drums
• Add Option # POLY-201 to roll plastic drum
• Use as drain stand to dispense from drum
• Enclosed sides and back protect the drive mechanism
• Electric drum mixers are available with various AC motors
  • Single or 3 phase electric motors
  • Explosion-proof electric
  • 50Hz electric motors
• Pneumatic drum mixer
  • Air powered drum roller

Capacity of Portable Drum Rollers

• Liquid Load: 500 Lb. (227 kg)
• Dry Load varies with drum RPM as a shifting dry load exerts greater stress on the drum mixer.
  • 350 Lb. (159 kg) at 15 RPM
  • 300 Lb. (136 kg) at 20 RPM
  • 250 Lb. (113 kg) at 24 RPM
• Roll a drum on 4 drive and 4 idler oil-resistant, neoprene, 4" (10.16 cm) diameter wheels
• Roll a drum with:
  • 6" to 28" (15 to 71 cm) in diameter
  • Up to 38" (96.5 cm) tall
  • The tipping lever will ONLY engage a drum 30" (76.2 cm) or taller
• Maximum ambient operating temperature: 140oF (60oC)

Variable Speed Portable Drum Rollers
Allow you to vary drum rotation speed from 15 to 24 RPM (13 to 20 RPM on 50Hz models).
RPM is based on a 22.5" (57.2 cm) diameter drum.

• Ideal for experimental use
• Allows fast initial drum rolling, then reduce speed for continued, gentle agitation

Fixed Speed Portable Drum Rollers

Customers use Morse Drum Mixers to:

• Blend batches of powder
• Ensure uniform batches
• Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
• Use as a chemical drum mixer
• Blend drum contents into homogenous product prior to use
• Keep epoxy from separating
• Grind and smooth parts in media
• Homogenize tailings and sediment samples
• Plasma spray powder mixing
• . . .and my favorite, "Roll propellant casting tubes for chemical prep prior to cast"

Hydra-Lift Drum Rollers

Hydra-Lift Rollers have Ergonomic POWER-TILT to get upright drum over onto roller wheels.
Vary drum rolling speed mix contents of Closed Drum Without Even Opening It!

Key features

 

• Roll drum to remix settled ingredients
• Eliminate transfer, clean-up, and special vessels
• Use separate drum for each batch
• No container to purge between batches
• Nothing to insert into drum to mix
• Easy to load by hand truck or hoist
• Variable Drum Speed from 5 to 20 RPM (4 to 16 RPM for 50Hz models), based on a 55-gallon (210 liter) drum
• Roll a steel drum: 6" to 26" (15 to 66 cm) diameter; maximum 40" (102 cm) length
• To roll a plastic drum, add Option # POLY-456
• To roll 1-to-5 gallon cylindrical can, install Option # 1-5-1 Idler Attachment
• Maximum ambient operating temperature: 130o F (54o C)
• Control Package and Guard Enclosure each sold separately
• IMPORTANT: OSHA requires enclosure with safety interlock
• Capacity:
  • 1000 Lb. (455 kg) Liquid Load
  • 400 Lb. (182 kg) Dry Load
    Shifting dry load exerts greater stress on drum rotator than fluid motion of liquid load

Morse developed the basic concept to provide "hands-off" drum mixing. Enjoy the benefits of easy, ergonomic loading and unloading and eliminate many hazards of manual drum handling.

Morse Hydra-Lift Drum Rollers accept a drum in upright position at floor level.

You control the hydraulic powered drum tilt to lift the upright drum and place it down on drum rotator wheels.

Start and stop drum rotation with a second control. A standard 55-gallon (210 liter) drum can be rolled from 5 to 20 RPM (4 to 16 RPM on 50Hz models), as desired, to thoroughly mix drum contents. Then return the drum to vertical to unload.

Combine three components (each sold separately) to meet safety requirements:

1. Drum Roller
2. Control Package
3. Guard Enclosure Kit

OSHA REQUIRES a guard enclosure with safety interlock, so that rotator automatically stops running if enclosure gate is opened.

IMPORTANT: OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Available with choice of electric or air motor.

Explosion-proof electric motors available. Only NON-Explosion Proof AC Control Packages include a pre-wired control box.

NEMA 4/12 Control Box includes Timer, Start and Stop Buttons, Red Emergency Stop Button, Lockable Main Disconnect, and Wire terminals for safety interlock switch. NEMA 7/9 Explosion-Proof Control Box includes Start and Stop Buttons, and wire terminals for external connection of safety interlock switch.

Explosion-Proof Control Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring in accordance to your local code.

Explosion-Proof motors are rated for Class I Group D, and Class II Groups F & G.

Additional Information:

• Delivery Time: 4 to 5 weeks